|MODEL||DH Ofem CI flexo Printing|
|TYPE OF EQUIMENT|
Model : 800 mm : 900 mm : 1000 mm : 1100 mm : 1200 mm : 1300mm : 1400mm
1. FDS door system Rigidstructure and simply operation
2. Sleeve technology Sleeve technology for both printing plate and anilox roller.
3.The printing units are anchored to the lateral frames byprecision linear guides on
operation side, to ensure the to ensure the proper rigiditynecessary to perform a high print
quality. On the rear side, each unit isanchored by two linear guides, one located below
and the other above, in orderto offer a solid supporting structure to the mandrels
during the sleevesreplacement operations.
4. Printing unitpositioning system Auto positioning function for printingunit according
to repeat length, positioning accuracy is 0.005mm
5. Pre-register system Pre-register function to lower materialwaste.
6． Autosplicing unwinder and rewinder Auto splicing unwinder and rewinder to
7. Drying Electrical heater/gas/steam/hot oil
8. Modular design Can be equipped with corona treatment, ink viscositycontrol
turn bar (4+4/8+8), second pass printing, qualitycontrol system etc.
Fill in the information below and we shall get back to you as soon as possible. By continuing you accept our General Terms and Conditions for Trading.